Accessories
Replaceable wear strip below the outer fork
These additional manganese strips protect the actual outer forks. The fork thickness is increased by 5 mm. The total wear thickness is 6 + 5 mm = 11 mm.
Wear strip under the fork tip
Wear strip screwed under the fork tip. The replaceable wear strip with deeply countersunk screws is mounted below the transition to the tip and protects the outer fork in the area most susceptible to wear.
Brinell hardness 600, thickness 10 mm
Load backrest
is screwed to the Y2 pallet stops and moves forward with the outer forks (height 1200 mm, width 750 mm or 950 mm). Incl. Y2 stops
For reach trucks, narrow at the bottom (750 mm), wide at the top (950 mm)
Width throughout 750 mm or 950 mm
Y2 stops minimum 50 mm and Y3 stops minimum 75 mm from the fork back
Pallet stops
(move forwards for a fixed usable fork length)
| Y1: | are located to the side of the fork back when the forks are retracted. |
| Y2: | 400 mm high stops to reduce the usable fork length. |
| Y2S: | like Y2 but cranked backwards. |
| Y3: | Height 850 mm, supports the load, fork usable length is reduced. |
Folding stops
These folding stops on the back of the fork can be folded up manually or hydraulically. The usable length of the fork can be changed in this way. Prices on request
Perfect forward visibility for the double-deep pallet storage with TeleKOOIforks
The housing of the Fork camera CFMC is just 25 mm high and about 30 mm wide
For telescopic forks without stops, the CPH Camera firmly mounted on the fork bend
Option TeleKOOIforks with Orlaco camera system
For double-deep pallet storage, a view to the front is important in order to be able to approach the second row safely. For this application, the narrow telescopic fork of the TFG2 or RGN2 series is preferably equipped with a CFMC fork camera. The camera is usually positioned just behind the fork tip and has additional LED lighting. Stops are required for cable routing.
Atex according to EN 1755-2015
Delivery including certificate for Zone II2G, IIB, II2D, IIIC
Outer forks made of special stainless steel with additional protection below the fork bend.
Available without pallet stop or with pallet stop.
KOOI®ReachControl (retrofittable system)
With electronic length indicator for automatic adjustment of different fork lengths. Display with touchscreen. The fork automatically stops in the preselected position via a solenoid valve (with auto-stop function). Bluetooth signal transmission, no mast cable required. Telescopic fork remains unchanged.
Can be retrofitted to all TeleKOOI forks.
