Weighing fork carrier WGT

Weighing fork carriage WGT

Weighing accuracy ±0,5% of weighed weight

The weighing fork carriage is attached to the original fork carriage of the forklift truck as a front-mounted device. Alternatively, the weighing fork carriage can be integrated directly into the mast. The weight and front-mounted dimensions of the original fork carriage are then saved and the residual load capacity of the forklift truck is better. The advantage of the weighing fork carriage is that standard forks or attachments can be mounted.

Features:

Robust construction with optimal visibility in Griptech design
100% made in Europe – high availability of components
new high-precision load cells from our own production
Designed as a front-mounted device or suspension integrated in the mast
Suspension integrated in the mast to reduce the front dimension and the dead weight, resulting in a higher residual load capacity
Homogeneous load distribution across four load cells ensures operational capability even under the most difficult conditions
Weighing at any lifting height
Upper FEM profile with recesses for tine locking, to protect against lateral slipping of the tines
new display device R320 in Griptech branding, enables connectivity to smart box and for Griptech Connect
Signal transmission standard via spiral cable (optional via radio or mast cable)

Weighing fork carriage WGT

Discover the many benefits, features, technical specifications and choices.

Description

Weighing fork carriage WGT
Model series	Load capacity kg at 500 mm LSP	ISO/ FEM rear/front	F mm	Display steps kg	V mm	ESP mm	Own weight kg
As an attachment (Display device R320)
WGT25	2500	II	1000	2	98	60	115
WGT30	3000	III	1100	5	105	60	150
WGT40	4000	III	1200	5	145	70	185
WGT50	5000	III/IV	1300	10	150	80	360
As an attachment (Display device R320)
WGTI 25	2500	int/II	1000	2	98	60	115
WGTI 30	3000	int/III	1100	5	105	65	150
WGTI 40	4000	int/III	1200	5	150	70	185
WGTI 50	5000	int/III or IV	1300	10	155	80	350

the maximum deviation is ± 1% (average 0,5%) based on the weighed weight depending on calibration and load
After installation, the system must be calibrated by the customer (system is not calibratable)
Signal transmission via spiral cable, standard 4,5 m long. For radio transmission see options

* Delivery includes side walls (fork carrier drawings, roller bolts, chain anchors and other small parts must be provided) Front dimension and ESP from the front edge of the side walls. Weight without side walls

characteristics

In combination with the FPN-R tine creation

In combination with rotating tine adjustments

Large LED display

Options

Voltage converter for 12 – 48 volts. (Output voltage 12 V) including stabilization filter, IP 67
Display device with numeric keypad and special functions (R420)
Piece counting function instead of adding function
RS232 interface including connection cable and Sub-D connector
Radio transmission (incl. 1 x battery up to 125 operating hours)
Extra replacement battery for radio transmission (up to 125 operating hours active weighing)
Mast cable guide instead of spiral cable
Large or additional display
Printer and data transfer