Fork adjustment ZVR

Tine adjustment ZVR

Adjustment within the
Frame width – high performance model

For applications that require changing the fork spacing within the frame width, the ZVR tine adjustment with a robust shaft guide is the ideal attachment for all applications. Lateral forces are absorbed by the guide shaft. In the upper area, the tines are supported by two rollers (if the version has a separate sideshift, by wear strips) in a U-profile. The visibility and the front dimension are optimized and result in the vehicle having a maximum residual load capacity. The frame width can be selected to be wider than the original fork carrier. Synchronization of the tine adjustment via a distributor valve.

Combine your attachment with a hydraulic weighing system from Griptech. For better visibility and higher operational safety, we recommend a Orlaco camera system.

Versions:

As an attachment with integrated sideshift
As an attachment with separate sideshift
Design integrated in the mast

Tine adjustment ZVR

Discover the many benefits, features, technical specifications and choices.

As an attachment

Integrated in the mast

Clear view tine adjustment FPX – version with or without integrated sideshift
Model series	Capacity kg at LSP 600 mm	ISO/FEM	Width F mm	Omin-Omax mm	cross-section DxS mm	V mm	ESP mm	Weight kg
ZVR(I) 25-SV	2500	II/int.	1050	370-990	120 × 40	92	265	230
ZVR(I) 25-SV	2500	II/int.	1150	370-1090	120 × 40	92	250	240
ZVR(I) 25-SV	2500	II/int.	1250	370-1190	120 × 40	92	240	250
ZVR(I) 35-SV	3500	III/int.	1200	380-1130	125 × 45	97	245	310
ZVR(I) 35-SV	3500	III/int.	1300	380-1230	125 × 45	97	240	325
ZVR(I) 35-SV	3500	III/int.	1400	380-1330	125 × 45	97	235	340
ZVR(I) 45-SV	4500	III/int.	1200	380-1130	150 × 50	109	269	385
ZVR(I) 45-SV	4500	III/int.	1400	380-1330	150 × 50	109	259	405
ZVR(I) 45-SV	4500	III/int.	1600	380-1530	150 × 50	109	249	425
ZVR(I) 50-SV	5000	III/IV/int.	1500	390-1420	150 × 50	125	245	465
ZVR(I) 50-SV	5000	III/IV/int.	1700	390-1620	150 × 50	125	240	490
ZVR(I) 50-SV	5000	III/IV/int.	1900	390-1820	150 × 50	125	235	520
ZVR(I) 60-SV	6000	IV/int.	1600	390-1520	150 × 60	125	256	555
ZVR(I) 60-SV	6000	IV/int.	1800	390-1720	150 × 60	125	246	580
ZVR(I) 60-SV	6000	IV/int.	2000	390-1920	150 × 60	125	236	610
ZVR(I) 70-SV	7000	IV/int.	1800	390-1720	150 × 60	135	240	660
ZVR(I) 70-SV	7000	IV/int.	2000	390-1920	150 × 60	135	235	690
ZVR(I) 70-SV	7000	IV/int.	2200	390-2120	150 × 60	135	230	720
ZVR(I) 80-SV	8000	IV/int.	1900	390-1820	150 × 65	140	226	740
ZVR(I) 80-SV	8000	IV/int.	2100	390-2020	150 × 65	140	220	775
ZVR(I) 80-SV	8000	IV/int.	2300	390-2220	150 × 65	140	214	810
ZVRI 100-SV	10000	integrated	2200	560 AM - 2020 PM **	200 × 70	175	249	1180
ZVRI 100-SV	10000	integrated	2200	560 AM - 2220 PM **	200 × 70	175	244	1300
ZVRI 120-SV	12000	integrated	2200	560 AM - 2020 PM **	200 × 80	180	245	1260
ZVRI 120-SV	12000	integrated	2400	560 AM - 2220 PM **	200 × 80	180	240	1300
ZVRI 140-SV	14000	integrated	2300	560 AM - 2020 PM **	200 × 80	225	240	1630
ZVRI 140-SV	14000	integrated	2400	560 AM - 2120 PM **	200 × 80	225	230	1670

* ZVRI series: Side walls included. The fork carriage drawings, chain anchors and small parts in special design must be provided
** not suitable for the Euro pallet longitudinal support
Weight and ESP without sidewalls. Stem dimension measured from the front edge of the sidewalls
ZVR series as an attachment. ZVRI series integrated in the mast
Information including forks (maximum length 1600 mm, longer forks on request)
Integrated sideshift included (stroke depends on fork position)
Specifications Version with ISO/FEM adapter plates, different opening ranges or load capacities on request

Clear view tine adjustment FPX – version with separate sideshift
Model series	Capacity kg at LSP 600 mm	ISO/FEM	Width F mm	Omin-Omax mm	cross-section DxS mm	V mm	ESP mm	Weight kg
ZVR 25-S	2500	II	1050	370-990	120 × 40	97	230	275
ZVR 25-S	2500	II	1150	370-1090	120 × 40	97	225	285
ZVR 25-S	2500	II	1250	370-1190	120 × 40	97	220	295
ZVR 35-S	3500	III	1200	380-1130	125 × 45	102	220	355
ZVR 35-S	3500	III	1300	380-1230	125 × 45	102	212	365
ZVR 35-S	3500	III	1400	380-1330	125 × 45	102	204	375
ZVR 45-S	4500	III	1200	380-1130	150 × 50	112	245	435
ZVR 45-S	4500	III	1400	380-1330	150 × 50	112	235	455
ZVR 45-S	4500	III	1600	380-1530	150 × 50	112	225	475
ZVR 50-S	5000	III/IV	1500	390-1420	150 × 50	130	215	525
ZVR 50-S	5000	III/IV	1700	390-1620	150 × 50	130	210	550
ZVR 50-S	5000	III/IV	1900	390-1820	150 × 50	130	205	575
ZVR 60-S	6000	IV.	1600	390-1520	150 × 60	135	235	580
ZVR 60-S	6000	IV	1800	390-1720	150 × 60	135	225	610
ZVR 60-S	6000	IV	2000	390-1920	150 × 60	135	215	640
ZVR 70-S	7000	IV	1800	390-1720	150 × 60	145	220	715
ZVR 70-S	7000	IV	2000	390-1920	150 × 60	145	215	750
ZVR 80-S	8000	IV	1800	390-1720	150 × 65	150	212	770
ZVR 80-S	8000	IV	2000	390-1920	150 × 65	150	215	800
ZVRI100-S	10000	integrated	1800	560-1620	200 × 70	181	252	1150
ZVRI100-S	10000	integrated	2200	560-1820	200 × 70	181	240	1250

Information including forks (maximum length 1600 mm, longer forks on request)
Sideshift at each fork position 100 mm to the left and 100 mm to the right. From FEM IV 125 mm to the left and right
Specifications Version with ISO/FEM adapter plates, different opening ranges or load capacities on request
Version integrated in the mast on request

Guideline values for residual load capacity of forklift trucks
Tine adjustment		ZVR 25	ZVR 35	ZVR 35	ZVR 45	ZVR 45	ZVR 50	ZVR 50	ZVR 60	ZVR 70	ZVR 80
Load capacity forklift	kg	2500	3000	3500	4000	4500	4500/600	5000	6000	7000	8000
X (accepted)	mm	450	450	500	500	500	500	560	560	650	650
LSP = 500 mm	kg	2225	2650	3150	3625	4150	4450
LSP = 600 mm	kg	2025	2375	2875	3325	3700	4100	4650	5550	6450	7250
LSP = 700 mm	kg	1850	2200	2600	3100	3300	3800	4300	5100	6000	6750
LSP = 800 mm	kg	1710	2075	2475	2850	3050	3500	3950	4750	5600	6350

FEATURES OF TINE ADJUSTMENT ZVR