Manual KOOI®-Reachforks

Grip&Reach

For transporting loads with different depths, the manual KOOI®-Reachforks can be used. This manual fork extension is a good and cheaper alternative to the clip-on fork extensions.
The patented Grip&Reach KOOI®-Reachforks are extended manually.
The mechanically movable outer shoes are attached to the base fork and remain mounted on the forklift. The way the outer shoes are adjusted is highly innovative. To change the fork length, the pin in the tip of the fork, which also serves as a grease nipple, is moved sideways, which unlocks the lock. The outer shoes can now be pushed in or pulled out to the desired length with the other hand. The lock automatically snaps back into place.

The manual KOOI®-Reachforks Grip&Reach offer the following advantages:

Can remain mounted on the forklift, are therefore always available
Lightweight yet robust construction
Innovative outer forks that cannot get caught on tension belts
Simple and time-saving extension of the forks
No hydraulic parts
Low maintenance costs
No loose parts

Comparison with attachable extension forks:

You always have the extension with you and it is always ready for use
Less physical exertion
Several lengths can be set via intermediate locks
Purchase incl. basic fork, thus a low-cost alternative

Advantages of the hydraulic extension forks(RGE series):

No need to dismount: forks are adjusted from the driver's seat
Can be adjusted to any length
Flat underside (no "sticking")
Incl. integrated, welded-on (replaceable) manganese strip to protect the base fork

Manual KOOI®-Reachforks Grip&Reach

Discover the many benefits, features, technical specifications and choices.

Download datasheet

Manual KOOI®-Reachforks Grip & Reach
Modèle	Length L/K mm	Load capacity in kg at 600 mm LSP	ISO/FEM	For fork. Load-bearing	Cross section DxS mm	C mm	ESP1/ESP2 mm	Weight/pair kg
'Slim Line
G&R 17	800/200	1700	II	1,6 t	132×41	40	230/260	100
G&R 17	800/400	1700	II	1,6 t	132×41	40	230/289	100
G&R 17	1000/600	1700	II	1,6 t	132×41	40	314/412	116
G&R 17	1200/800	1700	II	1,6 t	132×41	40	406/536	136
G&R 24	800/200	2400	II	2,5 t	132×45	45	220/275	104
G&R 24	800/400	2400	II	2,5 t	132×45	45	220/275	104
G&R 24	1000/600	2400	II	2,5 t	132×45	45	318/405	128
G&R 24	1200/800	2400	II	2,5 t	132×45	45	385/515	135
'Standard Line
G&R 20	800/200	2000	II	2,0 t	132×58	45	245/280	129
G&R 20	800/400	2000	II	2,0 t	132×58	45	254/307	129
G&R 20	1000/600	2000	II	2,0 t	132×58	45	343/427	152
G&R 20	1200/800	2000	II	2,0 t	132×58	45	434/553	174
G&R 20	1400/1000	2000	II	2,0 t	132×58	45	528/681	197
G&R 30	800/200	3000	III	3,0 t	132×58	45	237/262	139
G&R 30	800/400	3000	III	3,0 t	132×58	45	237/286	139
G&R 30	1000/600	3000	III	3,0 t	132×58	45	323/403	161
G&R 30	1200/800	3000	III	3,0 t	132×58	45	413/525	184
G&R 35	800/200	3500	III	3,2 t	132×63	50	239/262	152
G&R 35	800/400	3500	III	3,2 t	132×63	50	239/285	152
G&R 35	1000/600	3500	III	3,2 t	132×63	50	324/398	178
G&R 35	1200/800	3500	III	3,2 t	132×63	50	414/520	202
G&R 35	1400/1000	3500	III	3,2 t	132×63	50	510/644	226
G&R 50	800/400	5000	III	4,5 t	165×64	50	241/290	194
G&R 50	1000/600	5000	III	4,5 t	165×64	50	328/406	226
G&R 50	1200/800	5000	III	4,5 t	165×64	50	417/528	257
G&R 50	1400/1000	5000	III	4,5 t	165×64	50	509/653	289

Weight and dead center with ISO/FEM A suspension.
Painted in RAL 7021 (also the outer forks).
Different lengths available on request.

Attachments