Weighing forks WG-HD

Weighing accuracy ±0,1% of weighed weight

Weighing forks can be attached to any forklift with an FEM fork carrier. The weighing accuracy is very high and the system is designed so that the relatively rough use of the forklift cannot damage the weighing technology. Signal transmission is standard via radio or spiral cable. The calibratable version is only possible with a cable connection. Also available in conjunction with a fork adjustment.

Features/Benefits:

Signal transmission via radio, spiral or mast cable connection
Fast and cost-effective installation with radio transmission (only one battery and transmitter up to 125 operating hours with one battery charge)
Weighing at any lifting height
3 load cells in each fork ensure high accuracy
OptimaGabelKink from Vetter, the additional wear zone for up to 3 times the service life, low deflection and optimal stress distribution
Calibrated version including Class III calibration certificate and inclination sensor
Protection class IP 65
Charger with one battery

Weighing forks WG-HD

Discover the many benefits, features, technical specifications and choices.

Description

Weighing forks WG-HD, with 6 load cells and increased load capacity
Model series	Load capacity kg/pair at mm LSP	ISO/FEM*	Usable length mm	cross-section DxS mm	Display steps kg	V mm	ESP mm	Weight/per pair kg
Standard version (Display device R320)
WG-HD 25	2500 /600	iia	1180	140 x 65	1kg each**	70	440	175
WG-HD 35	3500 /600	IIIA	1180	140 x 65	2kg each**	70	460	187
WG-HD-50	5000 /600	IIIA/IVA	1180	185 x 65	5kg each**	70	370	260
Version calibrated according to Class III (Display device R320)
WG-HD-E 25	2500 /600	iia	1180	140 x 65	2 kg each (1250 pieces)	70	440	175
WG-HD-E 35	3500 /600	IIIA	1180	140 x 65	5 kg each (700 pieces)	70	460	187
WG-HD-E 50	5000 /600	IIIA/IVA	1180	185 x 65	5 kg each (1500 pieces)	70	370	260

*Additional charge ISO/FEM B on request
Weighing forks with radio transmission are supplied with 1 x battery (up to 125 operating hours actively weighing) and charger
Weighing forks with mast cable connection are supplied with 2 pulleys, 2 tension springs and 15 meters of mast cable (11 core)
Connection between the forks via a spiral cable for a fork spacing of approx. 1000 mm (Ak-Ak)
Supply voltage display device 12 Volt

** Dual range version with Display device R320:

WG 25: 0,5kg to 1000kg, 1kg to 2500kg
WG 35: 1kg to 1500kg, 2kg to 3500kg
WG 35: 1kg to 1500kg, 2kg to 3500kg

characteristics

“Heavy Duty” version with 6 load cells

Cranked stops to avoid damage to the goods in the “Heavy Duty” version

options.

Display device with numeric keypad and special functions (R420)
Additional charge fork length 800 mm
Additional charge fork length 980 mm
Additional charge fork length 1400 mm (thickness S + 2mm)
Additional charge fork length 1500 mm (thickness S + 2mm)
Additional charge fork length 1600 mm (4 load cells per tine, thickness S + 2mm)
Printer and data transfer
Voltage converter for 12 – 48 volts. (Output voltage 12 V) including stabilization filter, IP 67
RS232 interface including connection cable and Sub-D connector
Extra replacement battery for radio transmission (up to 125 operating hours active weighing)
Additional charge for stainless steel shoes and stainless steel load cells
Additional charge ISO FEM IIB
Additional charge ISO FEM IIIB