KOOI®Reachforks RG2/RG4

retracting and extending with load

KOOI®Reachforks are an excellent choice for companies that want to make their forklifts more versatile while saving costs. By using these telescopic forks, conventional forklifts can be converted into reach trucks, optimizing space utilization and storage density.

They also allow one-sided loading and unloading of trailers or wagons, which brings greater safety and time savings as well as lower fuel and labor costs. KOOI®Reachforks also allow for the safe and quick handling of many different pallet sizes without damaging the pallets or goods. These innovative forks can also reduce internal transport costs by up to 50% by allowing the simultaneous transport of two pallets instead of just one.

Invest in Griptech's KOOI®Reachforks to make your forklifts more versatile and cost-effective!

For the perfect view to the front, we recommend the Fork camera CFMC.

KOOI®Reachforks RG2/RG4

Discover the many benefits, features, technical specifications and choices.

Download data sheet:

KOOI®Reachforks RG2/RG4 for retracting and extending with load
Model series	Length L/K mm	Load capacity in kg/LC retracted	Load capacity in kg/LC extended	ISO/FEM	For forklifts Load capacity up to	cross-section D1/D2 xS mm	C mm	COG1/COG2 mm	Weight/pair kg
1 cylinder version extra narrow and an increased working speed
RG2 20	1100/750	2000/600	925/1300	II	1,8 t	131 / 139 57 ×	45	370/535	150
RG2 20	1200/850	2000/600	825/1450	II	1,8 t	131 / 139 57 ×	45	415/605	160
RG2 20	1350/1000	2000/600	685/1750	II	1,8 t	131 / 139 57 ×	45	485/710	175
RG2 25	1100/750	2500/600	1150/1300	II	2,0 t	131 / 139 57 ×	45	350/508	157
RG2 25	1200/850	2500/600	1035/1450	II	2,0 t	131 / 139 57 ×	45	395/580	166
RG2 25	1350/1000	2500/600	855/1750	II	2,0 t	131 / 139 57 ×	45	460/680	180
RGN2 30	1100/750	3000/600	1380/1300	II	2,5 t	131 / 139 62 ×	50	375/525	165
RGN2 30	1200/850	3000/600	1250/1450	II	2,5 t	131 / 139 62 ×	50	420/590	175
RGN2 30	1350/1000	3000/600	1025/1750	II	2,5 t	131 / 139 62 ×	50	485/695	190
'High performance model' 2 cylinders in each fork
RG4 25	1100/750	2500/600	1150 /1300	II	2,0 t	161 / 169 57 ×	45	365/535	180
RG4 25	1200/850	2500/600	1025/1450	II	2,0 t	161 / 169 57 ×	45	410/610	190
RG4 25	1350/1000	2500/600	680/1750	II	2,0 t	161 / 169 57 ×	45	475/720	210
RG4 35	1100/750	3500/600	1615/1300	II / III	3,2 t	161 / 169 57 ×	45	365/540	180
RG4 35	1200/850	3500/600	1450/1450	II / III	3,2 t	161 / 169 57 ×	45	410/640	190
RG4 35	1350/1000	3500/600	1200/1750	II / III	3,2 t	161 / 169 57 ×	45	475/720	210
RG4 45	1100/750	4500/600	2075/1300	III	4,0 t	161 / 169 57 ×	45	345/510	190
RG4 45	1200/850	4500/600	1850/1450	III	4,0 t	161 / 169 57 ×	45	390/575	200
RG4 45	1350/1000	4500/600	1550/1750	III	4,0 t	161 / 169 57 ×	45	450/685	220
RG4 58	1200/850	5800/600	2400 /1450	III/IV	5,0 t	161 / 169 62 ×	50	390/566	220
RG4 58	1350/1000	5800/600	1990 /1750	III/IV	5,0 t	161 / 169 62 ×	50	455/670	240
RG4 77	1200/850	7700/600	3180/1450	IV	6,0 t	215 / 227 68 ×	50	370/565	345
RG4 77	1350/1000	7700/600	2640/1750	IV	6,0 t	215 / 227 68 ×	50	435/670	375
RG4 105	1200/850	10500/600	4300/1450	IV	8,0 t	215 / 227 76 ×	60	425/620	405
RG4 105	1350/1000	10500/600	3600/1750	IV	8,0 t	215 / 227 76 ×	60	440/610	440

Higher load capacities (up to 40.000 kg) or special cross-sections and extension lengths from 1200 mm on request
To minimize speed losses, a supply line with a minimum nominal diameter of 8 mm is recommended. The working pressure on the fork carriage must be a minimum of 160 bar and a maximum of 250 bar. The optimal liter output is 15-25 l/min for the RGN2, TFG2 series and 20-35 l/min for the RG4 series
In cold stores, use is possible down to -30°C. However, we recommend using the next higher level of load capacity
Standard paint finish black/grey (RAL 7021)
The outer fork is closed at the bottom and has a continuous, integrated 6mm thick wear strip (an additional manganese strip is recommended for intensive or full-service use)
Accessories
Combination with tine adjustments